Contract Manufacturing in China for OEMs
A single engineering partner for manufacturing in China. P&A International engineers, prototypes and delivers turnkey contract manufacturing — PCB fabrication, PCB assembly (PCBA), box-build and system integration — managed end-to-end to your BOM, test and compliance requirement.
As an engineering-led contract manufacturer founded as an engineering consultancy, we assign one dedicated engineer to your project from DFM review to qualified NPI samples in 10–15 working days, then scale into volume through our vetted partner-factory network, where every supplier is ISO 9000 certified or better.
consultancy + manufacture
per project, end-to-end
qualified samples with test data
every supplier certified or better
Class 2/3 as specified
What we build for OEMs
PCB assembly (PCBA)
SMT, through-hole and mixed-technology assembly with AOI and test, to IPC-A-610 class.
Box-build & integration
Enclosure assembly, cable integration, firmware load, labelling and packaging — ready to ship.
PCB fabrication
Bare-board fabrication to your stackup, materials and class, ready for assembly.
Test, inspection & NPI
AOI, ICT, flying-probe and functional test, plus new-product introduction.
We also deliver the flexible PCBs, custom power supplies and wiring harnesses that go into your product, through the same engineering team and partner network.
Engineering capability
- Design-for-manufacture (DFM) and design-for-test (DFT) review
- BOM review, component procurement and obsolescence management via the partner network
- PCB fabrication to your stackup, materials and class
- SMT, through-hole and mixed-technology assembly — fine-pitch, BGA and QFN
- Box-build, cable integration, labelling, firmware load and packaging
- Inspection & test — AOI, ICT, flying-probe and functional test
- Conformal coating, potting and ESD / moisture-sensitive handling
- One dedicated engineer; qualified NPI samples with full test data before volume
At a glance
| Scope | PCB fabrication / PCB assembly (PCBA) / box-build / test |
| Assembly | SMT, through-hole, mixed; fine-pitch, BGA, QFN |
| Test | AOI, ICT, flying-probe, functional test, burn-in |
| Class | IPC-A-610 Class 2/3; ISO 13485 for medical |
| Prototype / NPI | 10–15 working days to qualified samples |
| Quantities | Prototype, NPI and production volumes |
| Compliance | CE / UKCA / UL marking and traceability as required |
| Quality | Every supplier in our network is ISO 9000 certified or better |
Why engineers & buyers choose PA
For design engineers
A true engineering partner — one dedicated engineer, DFM/DFT review, the right assembly and test process for your board, and NPI that de-risks the transfer to volume. We build to your design and standards.
For purchasing
Low-risk scalability — predictable 10–15-day NPI, flexible MOQ from prototype to production, target-cost DFM, a single point of contact, and a vetted ISO 9000+ partner network managed end-to-end by P&A.
3 easy steps to get started
Send us your package
Send Gerbers, BOM and assembly files (or a sample). One dedicated engineer reviews it and confirms the build with you.
Proposed build & quote
You receive a proposed build and indicative pricing — typically within 48 hours — to review and refine together.
NPI, test & production
Qualified NPI samples with full test data in 10–15 working days; on approval we scale into volume through our partner network.
Applications
Industrial & automation · medical & instrumentation · networking & telecoms · consumer electronics · IoT & embedded · energy & storage · automotive & e-mobility.
See our main electronics contract manufacturing page, plus flexible PCB, custom power supplies and wiring harness & cable assembly.
Scoping your manufacturing project
A clear scope gets you a faster, more accurate quote. A few decisions shape every build:
| Scope | PCB fabrication, PCB assembly (PCBA), or full turnkey box-build — tell us where you want us to start and stop. |
| Assembly | SMT, through-hole or mixed; fine-pitch, BGA and QFN need the right stencil, profile and inspection. |
| Test | AOI as standard; add ICT, flying-probe or functional test to match volume and reliability needs. |
| Class | IPC-A-610 Class 2 for general products, Class 3 for high-reliability; ISO 13485 for medical. |
| Volume | Prototype, NPI and production all supported — share annual volume so we right-size the build and MOQ. |
What to send us for a fast, accurate quote
The more of this you can share, the quicker we can return a proposed build and price:
- Bare-board Gerbers / fabrication drawing and stackup
- Bill of materials (BOM) with part numbers and approved alternates
- Assembly drawing, pick-and-place / centroid file and panelisation
- SMT, through-hole or mixed; single- or double-sided placement
- Box-build / system scope — enclosure, cables, labelling, packaging
- Test requirement (AOI / ICT / flying-probe / functional) and IPC-A-610 class
- Conformal coating, potting or special handling, and any compliance marking
- Target cost, prototype quantity and annual volume or call-off pattern
Working from an existing product or a competitor build is fine — our engineer will reverse-engineer it or propose an improved, manufacturable design.
📄 Download the electronics contract manufacturing RFQ checklist (PDF)
Get a quote
Send your Gerbers, BOM and assembly files and one dedicated engineer will reply — typically within 48 hours — with a proposed build and indicative pricing. No project too big or too small.
One dedicated engineer reviews every enquiry and replies with a proposed build and indicative pricing. Your details are used only to respond to your enquiry. Prefer email? support@pa-international.com.au